Intelligent Pool Control System

Save Up To 27% On Fuel Bills

Please click to see Manufacturers Instruction Manual

The Pool-Smart from Elecro is the intelligent pool control system that allows you to control and maintain your pool to the perfect temperature as economically as possible. 

The Complete Control Solution For:

• Electric Heaters

• Heat Exchangers

• Heat Pumps

• Circulation Plumps

Features:

• Priority Heating

• Accurate Temperature Control to 0.5ºC

• Diagnostic Display 

• Fully Programmable With Timed Control

• 2 User Defined Temperature Set Points - to utilise off-peak electricity rates

The Pool-Smart is supplied fully equipped with flow switch, temperature sensor probe fitted in custom pipe work T-Piece, for simple integration into any pool technical facility.

FAQ'S

Q - What is priority Heating?

A - Priority heating is when the Pool Smart digital controller can determine that the pool's temperature has dropped below the minimum temperature and then switches the pool's circulation pump on (via the pump control cable) so that the heating product can switch on and heat the pool back to the minimum temperature. Once the minimum temperature has been reached the heater will also switch off the pool's circulation pump.

Q - Why does the Pool Smart heater have 2 temperature set points?

A - The Pool Smart digital controller has been designed to be the most economical heating controller available, by allowing the use of 2 set points you are able to select a higher set point for when fuel is cheaper (i.e. off peak) and then a lower set point for when fuel is more expensive (i.e. peak rate). It is recommended that the lower set point is programmed to be your absolute minimum temperature, if the pool then drops below this temperature during the day the heater can switch on the circulation pump (as described above) and top up the heat to keep the pool at the minimum temperature.